What To Take Care Of During Toilet Installation
For all those love to do plumbing and are learning the same, a toilet installation may seem to be very simple. However, reckless installation can trigger difficulties as well as later challenges, which are more than in installing nearly any other fixture at home. Generally, most of the times, these problems come in when one fails to meet some requirements as stated by the regional or local rules. However, as a matter of fact, most people tend to ignore these requirements or are not aware of them. So, just having the dexterity and skills are not enough for a successful toilet installation. Moreover, developing skill is actually not the challenge for you. The challenge is, in fact, to fully understand the basic requirements. This article will just help you in that!
Get the Seat Right
Before taking the toilet measurements, it is necessary to determine the toilet size. Bear in mind that today’s standard size is larger than the models of the past. However, if you want to get that old size, look for cottage toilets that are ideal for small rooms.
Always Take Proper Measurements
In case of measuring the toilet seat, it is recommended to move from a sole side wall to another for having adequate elbow room. In case of an area with an angled corner, see to it that the fattest part of the seat is positioned within 30 inches of the room. This is mandatory regardless of a tank area being a bit tight. When it comes to measuring the toilet’s front portion, know that the rule mandates it to be minimum 24 inches. Sound too much? No, it is not because this much can be fully occupied by a single person in reality. In case of less space, avoid a stretched out toilet that ideally would be 17 inches rather than the normal size of 15 inches.
Never Ignore to Check the Condition of the Floor Flange
Whenever you decide to install a new toilet, regardless of the new model, your first job is to check out the condition of the closet bend as well as of the floor flange. In case of installation as a replacement, discard the wax on the floor along with the bolts of the existing toilet, as the wax can trigger leakages between the toilet base and the floor. You can use the flange in case it is solid as well as possesses a smooth surface. Use a new one in case of any cracks or uneven surface.
Always Install a Stub Out
According to the standards, installing a stub out is essential at the time of toilet installation for providing cold water. You will also need to include flexible tubing and a shutoff valve.
Pay Attention to Drainage
If you are installing a toilet that has a branch drain, it must be downward from a sink, tub, or shower sharing the drain. Further, compliance with distance requirements is vital with respect to a nearby wall or fixture. For example, a wall that is nearby must be within beyond 15 inches from the bowl centre of the toilet.
