How To Build A Wood Pergola?
How to build a wood pergola?
Getting to know a Wood Pergola:
One such structure that is believed to provide you with the much sought after protection on a sunny day is none other than a wood pergola. In simple words, a wood pergola is known to make shade for you on a bright midday sun. In recent times, a good number of people are seen turning towards a wood pergola. Moreover, most of the people have even gone ahead and built a wood pergola all by themselves. Our today’s discussion is likely to revolve around the approach that needs to be adopted and so also the individual steps that need to be followed in order to perfectly build a wood pergola. Let us now quickly have a look at the same.
How to build a wood pergola?
It is essential for you to note that it is absolutely easy to build a wood pergola. Moreover, this particular process is known to involve just three steps. So what are you waiting for? If you are looking forward to build a wood pergola, then in that case now is the time for you to go ahead and put into practice the below mentioned steps.
a) Select the place to build a wood pergola: First and foremost, you will have to zero down on the site that you find most suitable to build the wood pergola. You can take into consideration a number of alternatives, carry out a comparative study, pay heed to the views and opinions of your family members and eventually settle down for a particular location that you find most viable.
b) Lay down the posts: In the next step, you will be required to make way for the four posts. This can be done with the help of a post hole digger or even a two person auger for that matter. When you dig the holes make certain that you keep a depth of twenty four inches and width of nine inches. It is important for you to opt for a four by four post. You can fill the holes by pouring cement into it. It is advisable to opt for a fast drying cement. You have to then leave it to dry for round about twenty four hours.
c) Start getting the joist beams in place: Once you are done with laying down the posts, the next step would be to get the joist beams attached. It is desirable to cut out joist beams from a two by ten board. You will be required to cut down a sufficient number of joist beams in order to cover the complete area. Apart from this, you can even create a decorative look at the end of the joist beam by making designs on the wood, which can then be cut out making use of a jigsaw. You can place the joist beams on the posts by making use of lag bolts of around three inches.
d) Place the stringers on the joist beams: Last, but not the least, you will be required to place the stringers on the joist beams. You can cut out these stringers by simply making use of two by six boards. These stringers need to be hung on the joist beams. Like you did in the case of joist beams, you can even go ahead and give stringers a decorative look by making designs on the wood and cutting out the same with the help of a jigsaw. The next step would be to attach the stringers perpendicular to the joist beams. You can carry out this attachment by simply making use of galvanized deck screws that are three inches in size.
Steve is a freelance writer specializing in DIY and Home improvement related topics. He is writing on behalf of Thomann Hanry who are known for their expertise in Building Restoration related work.
